HL-2G Type Ultra-Pulsed Carbon Dioxide Laser Therapy Machine (Ultra-Pulsed Carbon Dioxide Laser Therapy Instrument) 

High-energy ultra-pulsed carbon dioxide lasers have many advantages over ordinary carbon dioxide lasers, such as: 

① It causes minimal damage, avoiding the previous drawbacks of ordinary continuous CO2 lasers, such as damaging the surrounding normal tissues, forming scabs, and making the wounds difficult to heal. Compared with conventional surgical methods, the clinical healing process has no significant difference and may even be faster. 

② The bleeding is minimal because the bleeding stops immediately upon incision. Therefore, there is very little bleeding throughout the entire surgical procedure. This enables a blood-free surgical field, which is ideal for precision surgical operations. 

③ The operation time is short, eliminating the need for blood clamping and suturing, and the wound does not require stitching either. This significantly saves a lot of operation time. 

④ Postoperative complications are rare. There are almost no cases of hematoma or bruising after the operation. The recovery time is short, and it has little impact on work and life, making it more acceptable to patients. 

Some technical parameters: 

Laser wavelength: 10.6 µm 

2. Laser Extraction: 7-joint torsion spring light-emitting arm 

3. Terminal output power: 1 - 30W, adjustable in steps of 1W 

5. Working mode: Continuous, single pulse, repetitive pulse, super pulse 

6. Pulse Output: Period 1 - 999 ms. Step size 1 ms, adjustable continuously. 

7. Super Pulse Wave: Modulation frequency 1000Hz ± 1Hz 

8. Spot diameter: The diameter of the small spot F50 is ≤ 0.1mm, and F100 is ≤ 0.2mm. 

9. Treatment tools: General treatment knife head, cutting knife head 

10. Safety Protection: Safety interlock, remote control, light emission protection, energy compensation, water cut-off protection, safety detection, etc. 

11. Cooling System: Built-in sealed water-cooling circulation system, high-sensitivity low-pressure water flow sensor 

12. Guidance light system: 640nm red semiconductor indicator light, with brightness adjustable continuously 

13. System Control: Microcomputer Embedded Control System 

14. System Selection: Dual operating systems, with the option to switch between Chinese and English systems. 

15. Supplementary System: Energy Damping Unstable Dynamic Compensation System 

16. Operating System: 10-inch true-color touchscreen, software version upgraded for free for life 

17. Electromagnetic Compatibility: Conducted by EMC electromagnetic compatibility testing (with test report available) 

18. Exhaust System: Built-in air blowing method / (There is also a smoke-free model available) 

19. Ambient temperature: 5 - 40℃ 

20. Relative humidity: < 90% No condensation 

21. Power supply: AC 220V ± 10% 50Hz  3A 

22. Dimensions: 350mm x 380mm x 1040mm (excluding the joint arm) 

23. Overall weight: 30 kilograms 

24. CFDA Registration: CFDA Class III Medical Device Registration Certificate